1. Waterproof coating
Regarding waterproof coatings, we should choose polyurethane coatings, which are the coatings with the best waterproof performance on the market now. In the waterproof treatment of the bathroom, we can't choose cheap waterproof paint. If the bathroom leaks later, it will be very troublesome to try to remedy it. Not only do we need to pay attention to the choice of paint, we also need to pay attention when applying waterproof paint. We need to choose dry weather to paint. When applying waterproof paint, we must first paint the base. After painting the base, we need to check whether the ground is flat. It is uneven and needs to be repaired. We need to apply it repeatedly when applying waterproof paint, and we cannot let go of the edges and corners of the bathroom. Every place needs to be painted. After painting the ground, it is generally recommended that the walls should also be Apply a waterproof layer of about 30 cm.
2. Water retaining strip
In addition to waterproof paint, what other ways are there to waterproof the shower room? We can also install waterproof strips in the bathroom and shower, which is generally recommended for families with larger bathrooms. We can use the water barrier with glass or shower curtain. Of course, the water barrier is also divided into plastic water barrier and stone water barrier. If we choose plastic water barrier, it is generally used with glass. If we choose the water retaining strip of stone, it can be used with glass, or it can be used with shower curtain. The installation of the water retaining strip is generally recommended to be about 5 to 7 cm above the ground. After the water retaining strip is installed, we need to check whether it can really block the water. After success, be careful when entering the shower room every time. Stumbled underfoot.
3. Separate shower room
If your bathroom is installed with a separate shower room, the first step is to check whether its glass and water seepage are in good condition during installation. The second step is to block the sewer pipe and let the water out for about three hours to check whether there is any external water leakage. If there is water leakage, you need to contact the manufacturer of the shower room as soon as possible.
