Conventional bathtub
The main components of a conventional bathtub are the cylinder body, faucet, bracket and pipe.
The materials also include cast iron bathtub, steel plate enamel bathtub, wooden bathtub, acrylic bathtub, etc.
Of course, depending on the type of installation, the main components are not always there.
Massage bathtub
The common jacuzzi mainly consists of two parts
● Cylinder block
● Massage system
The common part of the cylinder block is the ordinary bathtub. Most of the materials are also cast iron bathtubs, steel plate enamel bathtubs, and acrylic bathtubs. The same is true for different shapes. However, in the current market, most of the cylinder blocks are acrylic bathtubs.
The massage system is the core component of the massage bathtub, which is hidden by the nozzle (called massage nozzle in most cases) and the cylinder body Pipeline, main motor, control box (circuit part), etc.
Therefore, different from the conventional bathtub, the key of this massage system is to massage the bathtub. Based on the conventional bathtub, but the point of purchase and location will exceed the conventional bathtub.
Differences in the use of massage bathtub and ordinary bathtub
There should be 3 steps to purchase a Jacuzzi: understanding the nozzle, listening to the motor, and checking the details.
1. Do not place sundries in the bathtub
When using a conventional bathtub, there are no restrictions. Just put hot water, adjust the water temperature, and then you can stew yourself in an iron pot. I like to put a duckling 9. Anything can be put.
But it doesn't work here because of the massage system of the Jacuzzi. It is not allowed to throw superfluous things into the bathtub, especially towels and other easily entangled items.
2. Temperature use problem
For the water temperature regulation of a conventional bathtub, the water is static, and the heat transfer in different areas is slow. It doesn't matter if some people like hot water. After soaking in it, the water temperature will be gradually appropriate.
However, since the nozzle of the Jacuzzi will directly impact the body with water back and forth, the bath temperature of the Jacuzzi generally needs to be adjusted to be lower than that of the conventional bathtub, and the general manufacturer's recommendation is about 36-39 ° C.
3. Water level regulation
Conventional bathtubs can be placed with as much water as you like according to your height and sitting posture. There is no special requirement for water level, as long as you are not afraid of cold.
However, attention should be paid to the Jacuzzi. The Jacuzzi needs to be 10mm higher than the upper edge of the nozzle when it is used. The reason for this is to prevent the water pump from idling, which may cause the water pump to burn.
4. Light&Music
Just like the subtitle, light and music are part of the reason why many people like jacuzzi. (According to the model, not all massage bathtubs are equipped, but the market is biased in this way and the results are oriented)
