Advantages of hanging bathroom cabinets
If there is space in the bathroom, it is recommended to choose a bathroom cabinet instead of a basin, as the bathroom cabinet will be more practical. First of all, there are a lot of things that need to be stored in the bathroom. At this time, you can put everything into the bathroom cabinet; secondly, there needs to be a countertop around the washbasin, which can conveniently place many daily necessities. There should be at least one large and deep washbasin at home, so that It is very convenient to wash clothes, etc. The countertop of the bathroom cabinet should be as large as possible. If necessary, the bath mirror can be replaced with a mirror cabinet, and a storage space can be added to make full use of the bathroom space.
1. Installation process of hanging bathroom cabinets
First check whether the wall is solid. Select the wall to be installed according to the hole position on the back wall of the cabinet. However, the height of the counter top from the ground is between 80-82CM. Use an impact drill to drill holes in the wall and install the cabinet. The plastic accessories inside the body are expanded and installed into the holes, and then the main cabinet and the wall are locked with self-operating screws. After the installation of the main cabinet is completed, align the basin with the wooden frame of the cabinet and level it.
2. Installation details of hanging bathroom cabinets
1. Installation location
Before laying floor tiles and wall tiles, you must first confirm the installation position of the bathroom cabinet. Since installing the bathroom cabinet requires drilling holes in the wall, water inlet holes and drainage holes are also required. Once installed, the position generally cannot be moved.
Bathroom cabinet shapes and sizes
After the location of the bathroom cabinet is determined, the shape and size of the bathroom cabinet can only be determined based on the installation location. When purchasing a bathroom cabinet, you should first measure the length and width of the reserved bathroom cabinet, and finally purchase according to the measured dimensions.
Water pipe and electrical wiring diagrams
Confirm the pipeline diagram and circuit diagram before installation. Use a pneumatic drill to drill holes in the wall during installation. If you break the water pipe or wire circuit diagram, you must pry open some wall tiles to avoid unnecessary losses.
Follow the instructions to install
The accessories and installation of each bathroom cabinet are different, and the hole size (the size of the hole in the wall) of the same model is also different, so you can generally install it according to the instructions, but the installation process is basically the same.
